REVE D RDX part สินค้า R/C for 1/10 car FOR RDX Car
D1-001RM : REVED RDX MOLDED REAR DIFFUSER (1 pc)
แก้ไขการต้านลมที่ไหลผ่านด้านล่างของแชสซีได้อย่างมีประสิทธิภาพ แสดงให้เห็นถึงประสิทธิภาพการยึดเกาะที่ดีที่สุดไม่เพียงแต่ในระหว่างการขับขี่ทางตรงเท่านั้น แต่ยังรวมถึงในระหว่างการขับดริฟท์ในโค้งด้วย สามารถติดตั้งได้บนแชสซีซีรีส์ MC-1 และ YD-2 รวมถึง RDX
D1-003M : RDX Molded Top Deck
In addition to the top deck (L) top deck (S) top deck mount (L) and top deck mount (S) that can be used according to the battery type a motor cooling fan mount is included in addition.
D1-008FUG : RDX GRAPHITE FRONT UPPER ARM 1 PAIR BLACK
The front upper arm which combines graphite with resin promotes weight reduction and rigidity improvement around the front which is important for RWD drift and greatly improves suspension responsiveness.
D1-008FLM : RDX MOLDED FRONT LOWER ARM SET
D1-008FUM : RDX MOLDED FRONT UPPER ARM 2 PCS
D1-011R50 : RDX EZ Type Wheel Hub 5.0mm
Aluminum EZ type rear wheel hub that can be attached to the rear axle of RDX. Compared to the plastic rear hub that comes standard with the kit the use of aluminum improves the accuracy and by combining it with the Φ6.0mm axle used in the RDX it effectively suppresses core shake and allows for smooth rotation. In addition by holding down the pin that fixes the hub with an O-ring it stabilizes the rotation and prevents the pin from coming off when the wheel is attached or detached. It also reduces stresses when changing wheels.
D1-011R70 : RDX EZ TYPE 7MM WHEEL HUB SET
Aluminum EZ type rear wheel hub that can be attached to the rear axle of RDX. Compared to the plastic rear hub that comes standard with the kit the use of aluminum improves the accuracy and by combining it with the Φ6.0mm axle used in the RDX it effectively suppresses core shake and allows for smooth rotation. In addition by holding down the pin that fixes the hub with an O-ring it stabilizes the rotation and prevents the pin from coming off when the wheel is attached or detached. It also reduces stresses when changing wheels. Two types are available: 5.0mm and 7.0mm. We also prepared aluminum wheel spacers that can be used for maintenance set and tread fine adjustment. Please try the EZ type wheel hub that will make the RDX run even better!
D1-017M : RDX MOLDED FRONT SHOCK TOWER & BULKHEAD SET
D1-017S20 : RDX ALUMINUM 2MM FRONT SHOCK TOWER SPACER SET
Raise the 2.0mm shock tower by sandwiching it between the front shock tower and bulkhead. By raising the shock tower position the damper piston position is lowered for positive roll-induced control. Also even if you use a spring with a higher rate than the front spring that is standard on the RDX the suppleness of the shock movement will improve s teering operability. Please try the aluminum front shock tower spacer to improve the handling performance of RDX!
D1-018M : RDX Molded Rear Shock Tower/ESC plate